Measuring Square Footage
Posted by Mary Cox on Thursday, July 18th, 2019 at 4:41pm
Square footage is commonly used to determine if a home will fit a buyer's needs. The price per square foot can be used to compare the costs of different homes and even, determine the value of a property.
The challenge is what is the source of the square footage measurement and how was it done.
County records use square footage to determine assessed value for property tax purposes. They are assumed to be reliable but there can be inaccuracies in their tax rolls. Another source of square footage could be from the house plans but the problem there is that the builder may have made modifications, or a subsequent owner could have made additions.
Appraisers are required to measure the home to determine square footage and they generally, adhere to a standard method which leads to uniformity in the industry. The ANSI, American National Standards Institute, guidelines are considered the standard but there are no laws governing the process.
Because basements are below grade level, regardless of whether they are finished, they are typically not counted toward gross living area. Attics because they are above grade level can be included in gross living area if they are finished to the same standard as the rest of the home and they meet the minimum height requirement of seven feet.
Unfinished areas are usually not considered in the square footage because it is not livable.
For detached properties, it is common to measure the perimeter of the house but to only include the living areas, not porches, patios or garages. Gross living area includes stairways, hallways, closets with minimum height and bathrooms. Covered, enclosed porches would only be considered if they use the same heating system as the house.
By contrast, condominiums, generally measure the inside area of the unit. Some appraisers may add six inches to account for the wall thickness. If you were to compare the total of the interior room measurements of a detached home, it would be far less than the stated square footage using the normal method.
If the county records are significantly different from the appraisal or the plans, it will be necessary to determine which one is more accurate. This may require getting the home measured by an appraiser which should be less than paying for a complete appraisal.
Leave A Comment